FUNCTIONALITY, SAFETY AND AESTHETICS

Rolling gate / counter closure

HEYDEBRECK roller shutters combine maximum functionality, security and aesthetics with sophisticated technology and ease of assembly. In contrast to roller shutters, roller shutters are exposed to much higher loads. They are closed most of the time and due to their exposed position they are exposed to all kinds of weather such as scorching heat, rain, storms, snow and hail. For children, the garage door is often a welcome play area or a place to lean on bicycles. Inexpensive, thin-walled roller doors usually show clear signs of use such as scratches and dents. Heydebreck roller doors, on the other hand, still look like new even after many years.

The aluminum roller door from HEYDEBRECK offers you many advantages:

  • Convincing optics
  • Exceptional smoothness
  • High ease of use thanks to the optional radio remote control
  • Installation-friendly installation – ideal for retrofitting
  • The right roller shutter profile for every situation in the building
  • High-quality color-coated aluminum profiles with a long service life
  • Good thermal insulation
  • Safety through trailing edges – obstacle detection
  • Low-wear run
  • Professional technical solutions for all requirements

The HEYDEBRECK door system is of the best quality and functionality for private and industrial customers! The dense foam filling of the profiles guarantees excellent thermal insulation that pays off over the long term.
A wide, attractive range of colors offers the right look for every taste. Only proven branded motors or plug-in drives are used for the drive.

    Counter closures and roller shutters – Hey-Gate

    • Slats: Alpha 14x55mm, Magnum 13.5x55mm
      or Oscar/Bullit 14 x 53 mm
    • every 2nd bar locked
    • double wall roll formed
      and foamed aluminum profile
    • extruded aluminum trailing edge
    • available as open or closed system

    Complete roller shutter maxi element consisting of: brackets (for open system) or blind caps and boxes slanted by 45° (for closed system), infeed rollers, bearings, tubular motor, shaft bolt, roll-off protection, steel shaft, guide rails, motor control with up/down -button.

    Optional additional equipment: radio control, emergency manual transmission, contact end strip

    Every 2nd rod equipped with locking glides on both sides.

    Equipped with coated steel spring hangers or aluminum suspension profile.

    Depending on the requirements, Alpha, Magnum or the more stable and secure Oscar or Bullit can be used as roller shutters in the HEY-GATE system.

    Bale diameter
    Table bale diameter Hey-Gate
    Farben
    Color table Alpha

    Colors guide rails/box: white, grey, brown, silver/natural

    Special colours: powder-coated according to RAL

    Suitable equipment
    Guide rail 85/30/85
    Anti-lift profile

    Rolling grill – Hey-Grid

    • Slats 14 x 90 mm
    • every 2nd bar locked
    • stable extruded aluminum profile
    • extruded aluminum trailing edge with tubular piping
    • available as open or closed system

    Complete roller door consisting of: Brackets (for open system) or blind caps and boxes slanted at 45° (for closed system), infeed rollers, bearings, tubular motor, shaft bolts, roll-off protection, steel shaft, guide rails, motor control with up/down button.

    Optional additional equipment: radio control, emergency manual transmission, contact end strip

    Hey-Grid made of stable extruded aluminum profiles and extruded aluminum end profile with hose piping.

    Every 2nd rod equipped with locking glides on both sides.

    Equipped with coated steel spring hangers or aluminum suspension profile.

    Bale diameter
    Table bale diameter Hey-Grid

    (In addition to the specified bale diameter, "air" must also be taken into account).

    Armor weight: 8 kg/sqm

    Recommended max usage size: 450 x 350 cm

    Colors

    Rolling grilles and guide rails

    Standard colors: white, grey, brown, anthracite

    Special colours: powder-coated according to RAL

    Suitable equipment
    Anti-lift profile

    Roller doors – Hey-Maxx

    • Slats 20 x 75 mm
    • every 2nd bar locked
    • double-walled, roll-formed or extruded and foam-filled aluminum profile
    • available as an open or closed system

    Complete roller door consisting of: Brackets (for open system) or blind caps and boxes slanted at 45° (for closed system), infeed rollers, bearings, tubular motor, shaft bolts, roll-off protection, steel shaft, guide rails, motor control with up/down button.

    Optional additional equipment: radio control, emergency manual transmission, contact end strip.

    Top-Gate curtain made of double-walled, roll-formed/extruded, foam-filled aluminum profiles 20 x 75 mm with extruded aluminum end profile with rubber hose piping.

    Band thickness 0.65 mm.

    Every 2nd rod equipped with riveted locking slides.

    Equipped with coated steel spring hangers or aluminum suspension profile.

    Bale diameter
    Table bale diameter Hey-Maxx

    (In addition to the specified bale diameter, "air" must also be taken into account).

    Armor weight: 7.5 kg/sqm

    Recommended max usage size: 500 x 400 cm

    Colors
    Color table Hey-Maxx profile Topgate

    Extruded aluminum profiles available in all RAL colors

    Guide rails: white, grey, brown

    Suitable equipment
    Anti-lift profile

    Rolling shutters – VicTor WK 3 according to EN1627

    • Slats Bullit 14 x 53 mm
    • Security roller shutter certified according to WK3
    • with Bullit stainless steel roller shutters
    • 77/50/77 WK3 guide rail

    Open system consisting of:

    Steel consoles, primed steel round shaft, welded discs with axle mounts, 400 volt plug-on geared motor, safety guide rails, powder-coated, with bridge for holding the safety locks.

    Roller shutter curtain Bullit made of double-walled, roll-formed, hardened stainless steel profiles (14 x 53 mm) in a special thickness, with extremely hard cast resin filling, each bar equipped with a double-screwed safety lock on both sides.

    Lower roller shutter end with extruded aluminum hollow chamber end strip profile 14 x 63 mm with galvanized steel insert 8 x 40 mm. Additional equipment with a hollow chamber reinforcement profile made of extruded aluminum screwed to the trailing edge, which is also equipped with a galvanized steel insert 8 x 40 mm.

    Optional additional equipment: radio control, emergency manual transmission, contact end strip.

    The security roller door is from i.f.t. Rosenheim tested up to a size of 440 x 300 cm according to WK3-EN1627 and is only supplied with a dead man's switch (automatic overrun safety devices are available).

    A closed system is also available up to certain sizes. (Blind box not certified according to WK3)

    Bale diameter
    Table bale diameter VicTor WK 3

    (In addition to the specified bale diameter, "air" must also be taken into account).

    Armor weight: 18.0 kg/sqm

    Recommended max usage size: 550 x 300 cm

    Suitable equipment
    Guide rail 85/30/85
    Anti-lift profile
  • Hey-Gate Rolltore Stadion
  • Thekenabschluss Stadion Kiosk
  • Heydebreck roller shutter/garage door gallery image
  • Heydebreck roller shutter/garage door gallery image
  • Heydebreck roller shutter/garage door gallery image
  • Heydebreck roller shutter/garage door gallery image
  • Heydebreck roller shutter/garage door gallery image
  • Heydebreck roller shutter/garage door gallery image