HEYDEBRECK FULFILLS EVERY CUSTOMER REQUEST

Front-mounted rolling shutters

Three advantages make Heydebreck exterior-mounted mechanical housing elements (also: front-mounted rolling shutters) the first choice:

  • the high quality of the rolling shutters offers the best protection against burglary, weather and noise
  • large selection of colors and short delivery times provide fulfillment of every customer request
  • double quality controls ensure customer satisfaction

The idea of ​​placing the rolling shutter box outside the window is not new. It is a simple solution if no lintel boxes were planned or installed originally. With Heydebreck prefabricated elements, builders are guaranteed they are recieving the most stable material on the market.

Blind boxes can be made from folded aluminum sheet or in a more stable extruded version.

Ever-increasing energy costs and rapidly changing climatic conditions, from unbearable heat to record-breaking environmental events, make rolling shutters an indispensable feature of today's housing stock. Protection against break-ins is also included. With the Heydebreck exterior-mounted mechanical housing elements, you have the ability to “future-proof” your
dwelling, and in turn, significantly upgrade the quality and value of your house.

    Safety element Protecto TR111

    • ready-to-install element
    • certified according to TR111
    • Extruded aluminum box
    • Element with Mini-Magnum extruded rolling shutter
    • Guide rails 53/25/53

    Front-mounted rolling shutter element, box made of extruded aluminium, closed on 4 sides, powder-coated or anodised, aluminum panel, 20°/45° slanted or semi-circular as an inspection cover. Aluminum die-cast caps, powder-coated. Inspection cover additionally reinforced with aluminum bracket.

    Mini-Magnum rolling shutters made of double-walled, extruded aluminium. Additional trailing edge reinforcement profile with lateral pull-out protection.

    Reinforced guide rail 53/25/53 with hollow chamber.

    Shaft 60 mm, galvanized, ball bearings.

    Operation by motor or crank drive.

    Anti-lift device with rigid shaft connectors.

    From 20 kg rolling shutter weight with roll-off protection.

    Colors
    Color table Mini Magnum

    Element colors: white, grey, brown, RAL and anodized colors on request

    Safety element RC2 EN1627

    • front-mounted rolling shutter element
    • certified according to RC2
    • Extruded aluminum box
    • Element with mini-oscar aluminum rolling shutters
    • Guide rails 68/35/68

    Front-mounted rolling shutter element, panel made of 3 mm extruded aluminium, closed on 4 sides, powder-coated, three-piece aluminum panel, lower part slanted 45° as an inspection cover, locked with steel bolts. Powder-coated steel caps.

    Mini-Oscar roller shutter curtain made of double-walled, roll-formed, hardened aluminum profiles of special thickness, with extremely hard cast resin filling, each bar equipped with a double-screwed safety lock on both sides.

    Double anti-lift device using a continuous locking profile in the trailing edge and a continuous, extruded aluminum profile security device above the curtain with a mounting profile directly on the shaft. Trailing edge with reinforcement profile and steel insert.

    Aluminum guide rails reinforced with safety bar and hollow chamber 68/35/68, drilled from the front.

    Reinforced steel shaft 70 mm, octagon.

    Motor operation by wall or hand-held transmitter.

    Tested and certified according to RC2 up to a size of 209.5 x 235.0 cm (element size). Only non-perforated rolling shutter slats. Element tested only as left hand roller!

    From a tank weight of 20 kg with roll-off protection!

    Colors
    Color table Mini Oscar

    Element colors: white, grey, brown, RAL and anodized colors on request

    Safety element RC3 EN1627

    • ready-to-install element
    • certified according to RC3
    • Extruded aluminum box
    • Element with Mini-Bullit stainless steel rolling shutter
    • Guide rails 88/35/88

    Front-mounted rolling shutter element, panel made of 3 mm extruded aluminium, closed on 4 sides, powder-coated. Aluminum panel in three parts, lower part slanted at 45° as an inspection cover, locked with steel bolts. Powder-coated steel caps.

    Rolling shutter curtain Mini-Bullit made of double-walled, roll-formed, hardened special steel profiles, with extremely hard cast resin filling, each bar equipped with a double-screwed safety lock on both sides. Only available without light punching.

    Double anti-lift device using a continuous locking profile in the trailing edge and a continuous, extruded aluminum profile security device above the curtain with a mounting profile directly on the shaft. Trailing edge with reinforcement profile and steel insert.

    Aluminum guide rails reinforced with safety bar and hollow chamber 88/35/88, drilled from the front.

    Reinforced steel shaft 70 mm, octagon.

    Motor operation by wall or hand-held transmitter.

    Tested and certified according to WK3 up to a size of 209.5 x 235 cm (element size). Only non-perforated rolling shutter slats.
    Element tested only as left hand roller!

    From a tank weight of 20 kg with roll-off protection!

    Colors

    Element colors: white, grey, brown, RAL and anodized colors on request

    Roller shutter colors: bright brushed

    Front-mounted element "Hey-Silencio"

    • ready-to-install element with whisper motor

    • Box made of roll-formed or extruded aluminium, closed on 4 sides

    • Element with aluminum roller shutters, double-walled with foam

    • Guide rails 53/22/53 with hollow chamber


    Ready-to-install roller shutter element, box made of roll-formed or extruded aluminium, closed on four sides, stove-enamelled, two-part aluminum cover, lower part optionally half-round, quarter-round, 20°, 45° beveled or 90° as an inspection cover, cover caps made of die-cast aluminium, powder-coated.

    Shaft 60 mm, galvanized, ball bearings.
    Usable box sizes: 125, 138, 150, 165, 180, 205 mm

    Standard is the guide rail 53/22/53 with hollow chamber.
    However, other special guide rails are also available.

    Belt operation with pivoting screw-on winder.
    Motorization via wired whisper motor (Becker/Elero)

    In addition, the box, guide rails and shaft are insulated.

    Item available with: Charlie, Tango, Romeo, Mini Oscar, Mini Bullit.

    Colors
    Color Chart Charlie pro

    Colors element rollformed: white, gray, brown, light beige, silver, RAL tones

    Colors of the extruded element: white, grey, brown, EV1, RAL tones, C33 and C34 on request

    Front-mounted element slanted at 20°

    • ready-to-install element
    • Case made of roll-formed or extruded aluminum
    • Element with aluminum roller shutter
    • Guide rails 53/22/53

    Front-mounted rolling shutter element, box made of roll-formed or extruded aluminium, closed on three or four sides, stove-enamelled, aluminum cover slanted at 20° as an inspection cover, cover caps made of die-cast aluminium, powder-coated.

    Shaft 40 mm, galvanized, ball bearings.
    usable box sizes: 125, 138, 150, 165, 180, 205 mm

    Standard is the guide rail 53/22/53 with hollow chamber.
    However, other special guide rails are also available.

    Belt operation with pivoting screw-on winder.
    Motorization or crank drive possible.

    Item available with:
    Charlie, Tango, Romeo, Mini Oscar, Mini Bullit.

    Colors
    Color Chart Charlie pro

    Colors element rollformed: white, gray, brown, light beige, silver, RAL tones

    Colors of the extruded element: white, grey, brown, EV1, RAL tones, C33 and C34 on request

    Front-mounted element slanted at 45°

    • ready-to-install element
    • Case made of roll-formed or extruded aluminum
    • Element with aluminum roller shutter
    • Guide rails 53/22/53

    Front-mounted rolling shutter element, box made of roll-formed or extruded aluminium, closed on three or four sides, stove-enamelled, aluminum cover slanted at 45° as an inspection cover, cover caps made of die-cast aluminium, powder-coated.

    Shaft 40 mm, galvanized, ball bearings.
    usable box sizes: 125, 138, 150, 165, 180, 205 mm

    Standard is the guide rail 53/22/53 with hollow chamber.
    However, other special guide rails are also available.

    Belt operation with pivoting screw-on winder.
    Motorization or crank drive possible.

    Item available with:
    Charlie, Tango, Romeo, Mini Oscar, Mini Bullit.

    Colors
    Color Chart Charlie pro

    Colors element rollformed: white, gray, brown, light beige, silver, RAL tones

    Colors of the extruded element: white, grey, brown, EV1, RAL tones, C33 and C34 on request

    Half-round front-mounted element

    • frount-mounted rolling shutter element
    • Case made of roll-formed or extruded aluminum
    • Element with aluminum rolling shutter
    • Guide rails 53/22/53

    Ready-to-install rolling shutter element, box made of roll-formed or extruded aluminium, closed on three or four sides, stove-enamelled, half-round aluminum cover as inspection cover, cover caps made of die-cast aluminium, powder-coated.

    Shaft 40 mm, galvanized, ball bearings.
    Usable box sizes: 125, 138, 150, 165, 180, 205 mm

    Standard is the guide rail 53/22/53 with hollow chamber.
    However, other special guide rails are also available.

    Belt operation with pivoting screw-on winder.
    Motorization or crank drive possible.

    Item available with:
    Charlie, Tango, Romeo, Mini Oscar, Mini Bullit.

    Colors
    Color Chart Charlie pro

    Colors element rollformed: white, gray, brown, light beige, silver, RAL tones

    Colors of the extruded element: white, grey, brown, EV1, RAL tones, C33 and C34 on request

    Quarter-round front-mounted element

    • front-mounted rolling shutter element
    • Case made of roll-formed or extruded aluminum
    • Element with aluminum rolling shutter
    • Guide rails 53/22/53

    Front-mounted rolling shutter element, box made of roll-formed aluminium, closed on four sides, stove-enamelled, quarter-round aluminum cover as inspection cover, cover caps made of die-cast aluminium, powder-coated.

    Shaft 40 mm, galvanized, ball bearings.
    Usable box sizes: 125, 138, 150, 165, 180, 205 mm

    Standard is the guide rail 53/22/53 with hollow chamber.
    However, other special guide rails are also available.

    Belt operation with pivoting screw-on winder.
    Motorization or crank drive possible.

    Item available with:
    Charlie, Tango, Romeo, Mini Oscar, Mini Bullit.

    Colors
    Color Chart Charlie pro

    Colors element rollformed: white, gray, brown, light beige, silver, RAL tones

    Colors of the extruded element: white, grey, brown, EV1, RAL tones, C33 and C34 on request

    Plaster base elements

    • ready-to-install element
    • Extruded aluminum box
    • Element with aluminum armour
    • including guide rails

    Front-mounted rolling shutter element, box made of roll-formed or extruded aluminium, closed on three or four sides, stove-enamelled, aluminum cover slanted at 20° as an inspection cover, cover caps made of die-cast aluminium, powder-coated.

    With plaster rail profile and Heraklith panel as plaster base.

    Shaft 40 mm, galvanized, ball bearings.
    Usable box sizes are: 125, 138, 150, 165, 180 mm

    Standard is the guide rail 53/22/53 with hollow chamber.
    However, other special guide rails are also available.

    Belt operation with pivoting screw-on winder.
    Motorization or crank drive possible.

    Item available with:
    Charlie, Tango, Romeo, Mini Oscar, Mini Bullit.

    Colors
    Color Chart Charlie pro

    Element colors: white, grey, brown, EV1, RAL tones

  • Fertigrollladen Vorbau an Terrasse
  • Vorbaurollladen an Terrassentür
  • Haus mit halb offenem Rollo und Garten
  • Haus mit Schrägem Dach
  • Sitze im Garten vor Fertigelementen Rollladen
  • Fertigelemente an Hausfassade Vorbauelement Rollladen